Operation Process Of Brushing Silicone For Silicone Hands Or Feet

Do you know the operation process of Brushing Silicone for Silicone Hands or Feet ? Today we will introduce it  to you for your reference.

1.Prepare the necessary tools, including rulers, knives, brushes, wood board, etc.
 

2.Choose the type of silicone rubber according to the product’s structure, pattern and application. The mixing ratio is  1:1, then stir it evenly. Vacuum it to -0.1MP, which        can release bubbles. After vacuum-pumping, pour the silicone rubber into the mold.

3.When the silicone rubber is cured, remove the mold and take out the silicone hands or feet; Brush a layer release agent 

evenly,such as detergent, soapy water and Vaseline  and restore the mold. Then check and trim the silicone hands or feet 

with scissors. Use the Naphtha to clean the silicone hands or feet which is good for the adhesion of brushing silicone rubber.
 

4.When the Naphtha is dried, we choose the type of silicone rubber according to the product’s structure, pattern and application. 

The mixing ratio is  1:1, then stir it evenly.Vacuum it to -0.1MP, then brush the silicone rubber on the silicone hands or feet evenly.

5.The whole operation process is finished. We suggest to put the silicone mold into production after 24 hours. 

2017-02-24