Addition cure silicone for tire mold

DESCRIPTION of addition cure silicone for tire mold:

Addition cure silicone rubber for tire mold making is a kind of two part silicone rubber. The mixing ratio of 1:1 or 10:1. It can cure at room temperature as well as under heat. It's a kind of food grade silicone and mainly used for mold making.

APPLICATION of addition cure silicone for tire mold:

It is mainly used for making molds of tire, also can be used for making concrete stone, GRC, polyurethane products; wax, candle decoration; rapid prototyping molds; chocolate, candy and similar products.

CHARACTERISTICS of addition cure silicone for tire mold:

1. Excellent fluidity and good operability, easy to demold

2. Good tensile and tear strength

3. Outstanding bubble releasing

4. Low shirinkage

5. Environmentally, odorless

6. Aging resistance

WARM TIPS:

1. As addition cure silicone is a kind of platinum cure system ,which will be easy to cause uncure problem ,so kindly follow the tips below :

2. Do not mix with liuqid condensation silicone rubber or even the tool which used for condensation silicone;

3. Do not mix with organic matter which contains N, S, P organics and ionic compound like Sn, As,Hg, Ph;

4. Do not add any pigment or powder into the addition cure silicone rubber without any testing to prevent uncure problem.　

STANDAR PACKAGE:

20KG/drum, 200KG/drum

SHELF LIFE:

Twelve(12) months when stored under dry and cool place by original package under 25℃.

Free samples are available, welcome to contact with us at anytime.