How to use epoxy resin for art/jewelry/river table/table top properly?

1. The product to be potted needs to be kept dry and clean.

2.Weigh resin part A and part B hardener according to the given weight ratio into the prepared cleaned container, fully mixed the mixture again the container wall by clockwise to avoid incomplete curing.

3.Take the resin according to the usable time and dosage of mixture to avoid wasting. When the temperature is below 15 ℃, please heat part A to 30 ℃ first and then mix it with part B (part A will be thicken in low temperature );

4.When the relative humidity is higher than 85%, the surface of the cured mixture will absorb moisture in the air, and form a layer of white mist in the surface, so when the relative humidity is higher than 85%, is not suitable for room temperature curing, suggest to use the heat curing.

2023-02-23