Description:

RTV-2 liquid silicone rubber to make Sculpture Statues Art Mold is generally named as two part silicone rubber, Part A is a flowable liquid silicone, part B is the curing agent or catalyst. It's mainly used for all mold making with different size and pattern.

Application:

It is perfect for making mold in statue and figures industries ,such as Stone figurine ,ceramic statues, polyurethane statuary, ceramic statues, polyurethane animals,Buddha, plaster ceiling, artificial stone, GRC home decorations etc. while, it also application for making mold for Resin and poly resin crafts, Lighting ornaments, candles crafts, statue Buddha, relief, artifacts copied, Animals and plants sculpture.

Using instructions:

Step 1: prepare the original molds

Prepare an perfect mold model and clean it totally (the release agent can be detergent, soapy water and Vaseline)before operation .Take 100g silicone material and 2~5g curing agent strictly and mix them evenly.

*Notes:Make sure the toys and operation tool is cleaned up totally to avoid uncure problem .

Step 2: Vacuum pumping

Without exception, this step takes less than 10 minutes.(normally is 5munites) Otherwise, it will cause cross linking reaction, and no more further steps will be available.

Step 3: Pouring casting or Brushing operation

1. For simple pattern products we suggest use pouring operation way, which will be very easy to operate and demould. Pourable silicone require light viscosity which will be easy to flow smoothly and easy to de-air . (mold with fine and precision patterns with low hardness.)

2.For delicate pattern products we suggest use brushing operation way.which can copy the pattern exactly .brushing way require high viscosity which won't be easy to flow away and easy to brush(large size molds with high hardness)

3.The amount of the curing agent can be adjusted according to the actual requirements of the customer. If molds requiring fast drying and demould, more curing agent is needed; contrarily, if molds requiring slower drying and demould, less curing agent is needed.but we don't suggest to add silicone oil avoid oil problem.

Step 4:Demoulding:

After 35 hours later, can demould the silicone mold, it's will be better for molf to demould after 24 hours.

Notes:The curing temperature and curing time can be adjustable according to the operation conditions.

2020-07-01