What's skin safe liquid silicone rubber for face mask mold ? 

Description:

Skin safe liquid silicone rubber for face mask mold can be used for a long period and maintain softness and elasticity within a temperature range of -65°C ~ 200°C with the characteristics of excellent electrical performance and chemical stability, waterproof, ozone and climate resistance, non-corrosiveness, physical inertia, non-toxic, odourless, low linear shrinkage, easy operation, etc.

Application:

Liquid mold making silicone for face mask and body organ:  sex toys, women breast,  etc. The  FDA addition Silicone Rubber for life casting is nontoxic and durable, good at casting , very safe for human. It mainly applys to making sex toys , bra , mask  ect  , and also can be make nipples , glass , and other kinds of molds .

Using instruction :

1.It is two-component addition cure liquid silicone rubber,it can be produced for elastic material of transparent,hot-resistant,water-resistant,

 

2.It has proper viscosity,high transarency,good bonding ability

 

3.It is mainly used in nipple injection molded and diving glass .

Its advantage :high-tranparent,high tear strength,waterproof,anti-aging,no color change ,etc.

Features :

Skin safe liquid silicone rubber for face mask mold  is an transparent liquid silicone rubber, which is an elastomer cured under room temperature, has the following excellent properties:

1.Low viscosity

2.FDA certificate, it's very safe for human

3.Good resilience

4.Good heat stability and weatherability ( temperature resistant range of -60--250)

5.Skin color, very real feeling about the look

6.Good heat-ageing resistance

Warming notes: 

Mix component A and component B evenly according to the mixing proportion of 1:1, and can be poured after deairing the bubbles. The operating time (5-10) mins depends on the temperature; the curing time is 20-30 mins at the room temperature; and the curing time can be reduced to 10 minutes with the temperature increased to 80~120°C. The operating time of quick drying type  under room temperature  is less than 20 minutes and the curing time is 0.5 hour. The silicone can be produced in skin color, yellow, etc. according to the customer's requirements. 

2019-08-22