How to make Silicone Hands or Feet by brushing way ? 

Step1 .Prepare the necessary tools, such as rulers, knives, brushes, wood board, etc.
 

Step 2.Choose the type of silicone rubber according to the product’s structure, pattern and application. we use XRSIL-TC10 

silicone rubber with the mixing ratio of 1:1, then stir it evenly. Vacuum to -0.1MP, which can release bubbles. After vacuum-

pumping, pour the silicone rubber into the mold.
 

Step 3.When the silicone rubber is cured, remove the mold and take out the silicone hands or feet; Brush a layer release agent 

evenly(such as detergent, soapy water and Vaseline) and restore the mold. Then check and trim the silicone hands or feet 

with scissors. Use the Naphtha to clean the silicone hands or feet which is good for the adhesion of brushing silicone rubber
 

Step 4.The whole operation process is finished. We suggest to put the silicone mold into production after 24 hours. 

2019-05-28