Why silicone mold is sticky?

1.The main reason for this problem is that we do not handle the products or original molds well.

   We should deal with the original mold or products carefully before molding. Such as for the products with a complicated

    pattern or a unsmoothed surface, we should polish and clean the products,then spray the release agent. Normally, the release agent can be

    Vaseline , detergent. liquid wax Etc. In practical process, you can brush different release agent according to different material.

2.The second reason is that the operator pour the silicone into the mold when the mixture is not mixed evenly, so the finished silicone mold will

   not cured and dried entirely.

2019-03-01